Pozzi primed or clad casement #100

Fenster Product Number: #PZ100 (primed) PZ100-C (clad) QSR-PZ100 (Quiksash replica)

Model Identifiers:

  • PO stamped in spacer bar
  • Some models had original brown glass spacer bar
  • Rubber glazing boot
  • Primed version has 1/2" wide step down against glass perimeter on exterior
  • Very thick sash frame. 2-1/16"

Common Dimensions:

  • Width: xx 1/4"
  • Height: xx 1/4"

Available Versions:

  • Stile and Rail Kit (SRK) (boot primed and clad)
  • Complete sash (CS) (wet conversion) (primed only)
  • Complete clad sash (CS) A Fenster Quiksash replica is available in 4 clad colors.

Fenster Modifications:

  • A wet glazed conversion is available for the primed version to do away with the rubber glazing boot. This version has an exterior glass stop matching the original profile. Complete primed sash orders will be fulfilled with this conversion.

Fenster Product Specifications:

  • Rubber glazing boot is not available.
  • Original cladding is not available.
  • SRK/CS ship with new weatherstrip.
  • SRK ships unassembled. CS ships as wet conversion with IGU glazed at the factory.
  • No other hardware included.

Assembly Tips:

Cladding must be transferred from old sash frame at assembly for a stile and rail kit. Slide cladding off one end of each stile or rail. Cladding may be stapled in place at one or both ends. Position frame on glazing boot/glass and secure each corner with provided screws.

Installation Tips:

1. seal all surfaces and edges prior to installation. 2. Use old sash frame as a template to transfer hardware to correct location.