Pozzi (Jeld-Wen) primed or clad casement #200

Fenster Product Number: #PZ200 (primed) PZ200-C (Clad) QSR-PZ200 (Quiksash replica)

Model Identifiers:

  • Rubber glazing boot
  • Gray spacer bar
  • Very shallow sash at 1-7/16" thick. Compare to PZ100 that is 2-1/16" thick.

Common Dimensions:

  • Width: xx 1/4"
  • Height: xx 1/4"

Available Versions:

  • Stile and Rail Kit (SRK) (boot clad and primed)
  • Complete sash (CS) (wet conversion, primed only)
  • Complete clad sash (CS) A Fenster Quiksash replica is available for this profile in 4 clad colors. A Fenster clad color must be selected.

Fenster Modifications:

  • A wet glazed conversion is available for primed units only to do away with the rubber glazing boot. CS primed orders will be fulfilled with this version.

Fenster Product Specifications:

  • Glazing boot and original cladding are not available
  • SRK/CS ships with new weatherstrip
  • SRK ships unassembled. CS (wet) ships with IGU glazed at the factory.
  • No other hardware included

Assembly Tips:

Original cladding must be transferred from the old frame at assembly. Slide cladding off each stile or rail and transfer to corresponding side. Cladding may be stapled at one or both ends. Position frame around boot/glass and secure at corners with provided screws.

Installation Tips:

1. Seal all surfaces and edges prior to installation. 2. Use old sash frame as a template to transfer hardware to correct location. 3. Stationary sashes are either screwed in from jamb or held in with brackets behind the screen stop.