Hurd Window Parts and Repair

In your home, your windows are your eyes to the world. You want to protect and take care of this valuable investment. But what happens when the wood in those windows starts to age? Even with older windows — and especially when those windows are no longer covered by warranty —  you still have the less costly option of repairing them rather than replacing them entirely.  Better news: Fenster Components can repair your Hurd windows, possibly at a lower cost.

We invite you to compare the cost of repairing your Hurd windows with the pricing available through Fenster Components.

Fenster Components — based in the Indianapolis, IN area — has been manufacturing replicated window sash profiles for most major brands of wood windows since 1999.  Fenster can supply you or your contractor with replicated wood components to match your Hurd Windows. Fenster also offers innovative replacement products to upgrade your existing Hurd windows with better energy performance, extended life span, and less maintenance utilizing cellular PVC technology.

Work smarter. Work faster. Save money. Now that’s a better view.

Visit our website to learn more about our product lines, or to fill out an order form for your Hurd window replacement parts today.

10 Comments

  • NICK ROBERTS
    Posted October 13, 2015 at 5:35 pm | Permalink

    I need the right side, top & bottom parts including the sill. Glass measures 22 x 66. wood frame.

    • Posted October 13, 2015 at 7:50 pm | Permalink

      Nick, I appreciate your interest, but we need way more information than that. In our world, that request could mean 100 different parts. Your best bet is to complete one of the product request forms on our website and one of our service team will contact you. Also review our sash catalog to confirm we have the Hurd model you need. Thank you.

      • Gary Riley
        Posted October 1, 2019 at 7:27 pm | Permalink

        Do you have any replacement parts for Hurd casement windows in regards to hinges- specifically for top guide hinge for a 1995 Hurd casement?

      • Posted October 6, 2019 at 1:39 pm | Permalink

        Gary, you won’t find anything brand specific out there. Most manufacturers used TRUTH brand hardware which is very common out in the market. We sell truth parts from our hardware site; http://www.windowpartsusa.com.

  • SUZANNE TATE
    Posted October 9, 2017 at 4:13 pm | Permalink

    Our home is 35 years old. Hurd wood windows. Glass is broken in a stationary window. Who in Salt Lake City UT can replace the glass? I’ve called several companies: Central Glass, Hillcrest Glass, Murray Glass, All Purpose Windows & Doors. HElP!

    • Posted October 10, 2017 at 1:00 pm | Permalink

      Suzanne, That’s ridiculous. Any glass company should easily be able to replace that for you! I’m not sure what keeps them in business if that many companies can’t help you? Unfortunately we can’t either I’m afraid. We don’t much business west of the mountains so we are limited in contacts out there.

  • Steve Wolf
    Posted January 8, 2018 at 12:03 am | Permalink

    I have hurd casement windows in my upper bracket home built in 1999. I am looking for sash weather stripping. They are a wood interior with aluminum clad exterior. I was going to redo all the windows in my house with new weather stripping because when the windows are closed I can stick a playing card in the gap between the weather stripping and the aluminum frame of the window. I am looking at a quantity of 400 ft. Is that sold in large rolls in order to limit the waste? Thanks

    • Posted January 10, 2018 at 1:39 pm | Permalink

      Steve, I really have no idea what Hurd used on those. We have one model of Hurd, and its not what you are describing. All we have available is what is shown on our weatherstrip page on our website, http://www.fensterusa.com.

  • Ron & Lee
    Posted February 27, 2018 at 7:50 pm | Permalink

    We have 14 double hung Hurd windows newly installed in 1990, in a late 1890’s house.
    And then, in 2011 we had 24 more double hung Hurd windows were installed in a new construction.
    However, right away we had problems with the mechanics of the last set of Hurd windows sliding up and down. Small pieces broke loose & fell to the floor, as we would hear a ‘spring’ snap back. I can’t tell you what the three; 1 metal cylinder shaped, 1 simple clamp shape, and 1 hard plastic pieces, are called, they are no longer than a thumbnail and fit between the frame & the window. These pieces have broken and fallen out! causing the windows to Not go up and down – actually partly stuck. Therefore, one window is partially OPEN – this winter weather… in Iowa for two months now! Nor can it be locked!!
    I have contacted the company, even sent photos, Twice! – short version = with NO help from them!
    Can you help?

    • Posted March 4, 2018 at 3:46 pm | Permalink

      Ron, I’m sorry to hear that. That is pretty typical of the industry. Not to mention Hurd is “technically” out of business since they were purchased by another company about 4 years ago. The new owners never want to help out old customers. Unfortunately, I don’t think we can be of much help either. Your windows (at least the newest ones) are too new for us. We typically don’t start to research obsolete models until they get 10 years old. I really have no idea what components Hurd used on their windows in 2011. The older ones probably had a standard compression jambliner, which ours would more than likely work on. Without seeing what you have and what’s going on, its hard to make a solid recommendation.

Post a Comment

Your email is kept private. Required fields are marked *