MW clad window

We now have a clad sash option in our Quiksash line of products to fit two models of MW clad window.  The Fenster Quiksash is a re-engineered version of the original brand’s sash altered to receive our proprietary aluminum cladding profiles.  All Quiksash models  including the MW clad window, are similar in design and appearance from the exterior, bringing consistency to the product.  However, all Quiksash models maintain design elements from the original profile guaranteeing a perfect fit and function in the existing window frame.  Utilizing current glass technology, your window’s energy efficiency can be significantly upgraded and still keep the original look without replacing the whole window.  A Fenster Quiksash can also be a cost effective solution for seal failure.

MW vinyl clad exterior corner  The Fenster Quiksash replaces this older model of vinyl clad MW.  Notice the thin plastic glazing bead against the glass as an obvious identifier.  It is also important to note, this is a VINYL clad window, not aluminum.

 

 

MW vinyl clad newer model The Fenster Quiksash also replaces a newer MW vinyl clad window that has welded corners and a distinct stepped profile to the face of the sash.  Click the photo to enlarge.  This newer model has a wood interior glass stop which the Fenster model closely resembles.

 

 

fenster quiksash MW vinyl clad ext cornerfenster quiksash MW vinyl clad int corner  The Fenster Quiksash takes elements from both WM clad window models and blends them.  The exterior side is a flat 2″ wide face with an interior wood stop.  The thickness remains 1.5″ matching both original models.  It is also important to note, the Quiksash is aluminum clad, not vinyl.  Although the exterior profile and material has be re-engineered, the shape and size of the frame has not, allowing the Quiksash model to easily retro-fit into the existing WM clad window frame.

Fenster Quiksash models come in 4 industry standard colors with custom colors available with an order of 10 or more.

Order your Fenster Quiksash WM clad window replica today at www.fensterUSA.com

8 Comments

  • Woodford
    Posted October 20, 2015 at 9:50 pm | Permalink

    Hello:
    I am very interested in your Quicksash replacements for MW clad windows. I have a rotten MW Freedom double hung, call size 3062 (30″ X 62″), vinyl clad exterior, natural wood interior, product number FRDHSAOS, low E glass, sculptured grids. I think the MW vinyl balances are OK.

    Will your aluminum clad products replace these sashes?

    Thanks,
    Woodford

    • Posted October 21, 2015 at 1:23 pm | Permalink

      Yes! In most cases, our Quiksash kit is a direct replacement for most wood/clad double hung windows that originally had, tilt-in vinyl compression jambliners. You get a new set of jambliners (that match our sashes) and an upper/lower set of sashes sized to match your original sashes. If you haven’t already, you can read up more on this product on the aluminum clad replacement sash product page. We will need all of the information requested on that associated order form to confirm an order for you. Thank you!

  • Anne Benedict
    Posted October 28, 2015 at 7:56 pm | Permalink

    We have multiple (at least 6) MW windows with wood rot on the lower rails only. Could just these rails be replaced? The windows look like the white MW frame on your website. The exterior frame is about 2″ wide. The house was built in 2001 and I found a note that said they were DP50’s and also have a brochure with “MW Freedom Vinyl-Clad Casement”. Hope this is enough to identify but I can send a picture if needed. Trying to find an economical solution and would like a ballpark price. Thanks!

    • Posted November 2, 2015 at 4:58 pm | Permalink

      Anne, MW had several models available. If in fact we are talking about the same model of vinyl clad casement, we do not have exact replica parts for those. The construction of the sash itself makes a repair difficult if not impossible. What you are seeing in our catalog is an after-market replication to fit in the original opening.

  • Bud Moulse
    Posted March 20, 2017 at 4:03 pm | Permalink

    My Home was built in 1995 and we used M W Freedom Series vinyl clad casement windows. I like a lot of folks have the lower part of the sash rotting. The sash its self is 2′-2-1/2″ wide and 5′-10-1/4″ long. Do you have replacement sashes available? How do I go about ordering.

    • Posted March 20, 2017 at 11:52 pm | Permalink

      Bud, Well…sort of. We make a replica sash that fits seamlessly into the frame. However, we’ve had to convert that to aluminum clad instead of vinyl because the vinyl cladding is not available to us. Our sash fits great, but its significantly different in appearance from the original. Customers purchasing from us are either replacing all the sash on their home so they all match, or simply don’t care about how they look because replacing all with new is not an option for them. There are pictures on our website profile catalog, https://www.fensterusa.com. On the index, look under MW for vinyl clad casement and you’ll bring up the page for our MW200.

  • Posted September 25, 2018 at 9:48 am | Permalink

    Good Morning,

    We built our home in 1994 and the bottom sash in both of our upstairs dormers are rotting.

    They are both Wenco Aluminum Clad Premium Tilt Double Hung 3446.

    When I went to your Wenco Sash Model it says it is unavailable.

    I checked the Jeld-Wen sash profile and they look different than ours.

    Thank You

Post a Comment

Your email is kept private. Required fields are marked *